| Symptoms |
Check |
| "Ghost" or double images |
- This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may improve the picture.
|
| No power |
- Check that the AC power cord is plugged into the mains socket
- Unplug the power cord, wait for 60 seconds. Then re-insert plug into the mains socket and turn on the unit again.
|
No picture |
- Check antenna connections at the rear of the unit to see if it is properly connected to the unit.
- Possible broadcast station trouble. Try another channel.
- Adjust the contrast and brightness settings.
- Select a correct input.
- Is a non-compatible signal being input?
|
| Good picture but no sound |
- Increase the VOLUME.
- Check that the unit is not muted.
- Check Whether the sound is output to head phone
|
| Good sound, poor colour |
- Adjust the contrast, colour and brightness settings.
|
| Poor picture |
- Sometimes, poor picture quality occurs when having activated an S-VHS camera or camcorder connected and having connected another peripheral atthe same time. In this case, switch off one of the other peripherals.
- Check whether the room is too bright
|
| Horizontal dotted line |
- This may be caused by electrical interference (e.g. hairdryer, nearby neon lights. etc.)
- Turn off the equipment.
|
| Television not responding to remote control |
- Check whether the batteries are working. Replace if necessary.
- Clean the remote control sensor lens on the unit.
- Do not use the remote control under strong or fluorescent lighting.
- The batteries should be inserted with polarity (+, -) aligned.
|
| Snowy picture and noise |
- Check the antenna connection.
|
| No stable or not synchronized VGA picture |
- Check if you have selected the correct VGA mode in your Pc.
|
| No output from one of the speakers |
- Adjust Balance in the audio menu.
|
